Amply Toa A-2128S

Power Source    220V AC, 50/60 Hz or 14V DC
Rated Output Power    2 × 120W
Power consumption    520W (operated with AC at rated output)
286W (operated with AC at EN60065 standard)
20A (operated with DC at rated output)
Frequency Response    50 - 20,000 Hz, ± 3dB
Distortion    Less than 1% at 1kHz, 1/3 rated power
Input    MIC1: -60dB*, 600 Ω, Balanced, Phone Jack, Echo
MIC 2-3: -60dB*, 600 Ω, Balanced, Phone Jack, Wireless Tuner 1-2
MIC 4-5: -60dB*, 600 Ω, Balanced, Phone Jack
AUX 1-3: -10 dB*, 10Ω, Unbalanced, RCA Pin Jack
PWR AMP IN: 2 x 0 dB*, 10kΩ, Unbalanced, RCA Pin Jack
Output    Speaker Outputs: Floating Balanced
High Impedance (100V): 2 x 83 Ω
Low Impedance (4 Ω) : 2 x 22V
REC OUT: 0dB* (1V), 600 Ω, Unbalanced, RCA Pin Jack
PRE AMP OUT: 2 x 0 dB*, 600 Ω, Unbalanced, RCA Pin Jack
Phantom Power    ON or OFF for MIC 1 with switch setting ( +21V DC)
S/N Ratio    More than 80 dB All Minimum Volume Control
More than 50 dB All Maximum Volume Control
Tone Control    Bass± : 10dB at 100 Hz
Treble± : 10dB at 10 Hz
Indicator    Power, Signal, Peak Signal, Wireless Mic Signal
Finish    Case: Steel Plate, Grey / Panel: Alminum grey
Dimensions    420(w) × 144(h) × 361(d) mm
Weight    19.5kg
Accessories    2 × BNC Antenna